Sketch uses 2086 bytes (6%) of program storage space. Maximum is 32256 bytes.
Global variables use 184 bytes (8%) of dynamic memory, leaving 1864 bytes for local variables. Maximum is 2048 bytes.
Compilation complete.
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0xce
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0xce
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0xce
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0xce
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0xce
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0xce
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0xce
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0xce
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0xce
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0xce
Upload error: Error: 13 INTERNAL: Failed uploading: uploading error: exit status 1
bu hata avrdude yani programı arduino ya aktaran yazılımın hatası
a-) programlayıcının dogru com porta takdıgına emin ol
b-)arduino ide de dogru com port u sectiğinden emin ol
c-) usb kablonu kontrol et
d-)arduino kartını kontrol et
benim önerilerim bunlar umarım yardımım dokunur…
avrdude, Arduino IDE tarafından kullanılan yardımcı programdır. AVR Downloader Uploader anlamına gelir ve kodu karta yüklemeyi sağlar. avrdude: stk500_recv() hatası, bilgisayar ile kart arasında bağlantı hatasıdır. Bundan dolayı kesin bir çözümü yoktur ama şunları deneyebilirsin:
Kartı doğru seçip seçmediğine bakabilirsiniz. ( Araçlar bölümünden)
Doğru porta(USB, vb.) bağlı olup olmadığını kontrol edebilirsin.
Kablonda herhangi bir sorun olup olmadığına bakabilirsin.
Kartı kırmızı butondan resetleyebilirsin.
Kartında bir arıza olup olmadığına bakabilirsin.
Farklı bir port kullanabilirsin (Araçlardan portu değiştirmeyi unutma)
Farklı bir bilgisayarın varsa onu kullanabilirsin.
Arduino IDE’yi silip yükleyebilirsin.
Başka bir soru daha var böyle istersen ona bakabilirsin: